How to Clean Orbeez That Spilled on Floor

How to Clean Orbeez

Sometimes it happens that the orbeez suddenly falls down from our hands or it happens that we use them while playing with orbeez guns, for Decoration and kids play with them. So they spread on the floor, then the problem is that we How to clean orbeez so we can reuse or clean them for use again.

Before you step on them and slip and fall and get hurt, or your pet or child accidentally eats them. I will tell you 8 solutions to clean them. With its help, you can clean the scattered orbeez.

Using a Dustpan and Broom for Cleaning

First of all, with the help of a broom, you collect all these scattered orbeez in one place on the floor and then with the help of a dustpan cleaning up, put them in the dustbin. Take them out of the dustpan and put them in the bucket that is their place.

Picking Orbeez off Manually

Some orbeez are such that due to their round shape, they cannot be collected by the broom, nor can we pick them up with the help of a dustpan and put them in a bucket. So the best solution is that We pick them up one by one with our hands and put them in a bucket so that the whole floor is clean.

Clean the Floor with Water

After you put all these orbeez in the bucket, finally wash your floor with water so that the slippery floor caused by these balls will be removed because falling can damage your body a lot. 

Using Vacuum for Clean Orbeez

You can also clean the orbeez with a vacuum cleaner, but in this method increases the risk of orbeez breaking. So use this method only when you don’t want to reuse the orbeez. Take the vacuum close to the orbeez then switch on it. The vacuum will take all the orbeez from the floor. In this way, your house or room, inside or outside, will be cleaned.

Using a Wet Cloth or Sponge Picking off Dry Orbeez

Dry orbeez is very difficult to pick up from the floor, so don’t worry, you can use a wet cloth or a sponge for this. Wet a cloth or sponge with water and place them on the spot where the orbeez are scattered. Due to the wet cloth or sponge, orbeez will stick to them over time. This way your floor will be clean. 

Using a Lint Roller 

If you want to remove the orbeez from the free in the easiest way, the lint roller method is the best. All you have to do is roll up the sticky lint roller on the floor. Automatically the orbeez will stick to the lint roller. The method is used only in dehydrated orbeez. 

Using Duct Tape 

Similar to Lint Roller, this method is Duct Tape. All you have to do is wrap the duct tape around your hand with the sticky side facing out. As you place the tape over the orbeez, the orbeez are sticking with the tape. In this, say that the defective one is that it is very difficult to remove the orbeez from tape, so they may break.

In the End Checking and Cleaning Hidden Areas

When you are completely satisfied that the floor has been cleaned, then one thing must be taken into consideration at that time,  are the corners of the room or below tables cleaned?

Always clean hidden areas that are out of sight. 

FAQ’s on How to Clean Orbeez?

Allow the waterbeds to dry first, After drying, soak them in antibacterial dish soap water. Take them out again with soapy water and let them dry again. From this method, the water beads are sanitized. 

The best way is to let the orbeez dry first and then clean them off the floor with a vacuum when they are completely dry. 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *